Chatsworth Products Hot Aisle Containment - Manual (Page 4)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 4
INTRODUCTION
This document is the User’s Manual for CPI Build To Spec Kit Aisle Containment
Solution. It includes basic assembly and installation instructions for the Build To Spec
Kit, Aisle Containment Door Assembly; Full Height Cabinet Blanking Panels and
Cabinet To Floor Sealing Kits, which are used together to create an Aisle Containment
Solution.
Build To Spec Kit Aisle Containment Solution User’s Manual
©2013 Chatsworth Products, Inc. All rights reserved.
Legal Information
The information contained in this guide is subject to change without notice.
Chatsworth Products, Inc. (CPI) shall not be liable for technical or editorial errors or
omissions contained herein; nor is it liable for any injury, loss, or incidental or
consequential damages resulting from the furnishing, performance, or use of this
material and equipment.
Warranty
Chatsworth Products, Inc. (CPI) guarantees manufactured products and each part or
component thereof against all defects in material and/or workmanship. CPI agrees to
remedy any manufacturing defect either through replacement or repair at no charge
provided that the defective unit is returned, transportation prepaid, to the CPI factory.
The warranty extends for a period of one year from the date of installation or initial use,
provided that this period shall not exceed 18 months from the original date of shipment
from the factory.
Any product that has been repaired or replaced shall be similarly warranted on its repair
or replacement for the remaining product warranty period or 90 days from the date of
repair or replacement, whichever expires last.
This warranty does not extend to products that have been subjected to neglect, accident
or improper use, nor to units that have been altered by non-CPI personnel.
No warranties other than those set forth in this section are given or implied with respect
to the products furnished. CPI shall, in no event, be liable for consequential damages,
for loss, damage or expense directly or indirectly arising from the use of the products,
for any inability to use materials or from any other cause.