Chatsworth Products Hot Aisle Containment - Manual (Page 48)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 48
CABINET FLOOR ATTACHMENT
Attach the bottom of each side panel to the floor mounting angle with three M6 flat head
screws and a washer plate. **TIP** Use a flat screwdriver positioned underneath the side
panel to aid with hole alignment.
LOWER ROLLER INSTALLATION
Install the lower roller assemblies (two for the double door and one for the single door) as
shown
on the following page . Insert the assembly through the rectangular opening on the
front of the side panel and rotate it into position. Attach to the side panel with two M6 x 16
bolts. The roller assembly should be positioned at the top of the slots. The bolts should only
be finger tight, the roller will be moved later.