Chatsworth Products Hot Aisle Containment - Manual (Page 29)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 29
2. Measure, cut and assemble the Polycarbonate Panel
• Measure the width of
the opening – the
distance between
cabinets.
• Cut the
Polycarbonate Panel
to match the width of
the opening.
• Then, cut the
Polycarbonate panel
to be 1” (25 mm)
higher than the
height of the
opening.
• Insert the trimmed
panel into the
Universal Bulb Seal
so that the panel
extends above the
tops of the
extrusions.
• Be sure to orient the
Extrusions so that
they face the same
side of the panel
(see top view below)