Chatsworth Products Hot Aisle Containment - Manual (Page 35)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 35
FLOOR MOUNTING ANGLE INSTALLATION
SLAB FLOOR
Install four 3/8” concrete anchors (PN: 40604-001, not included) into the four drilled holes.
Bolt the two mounting angles to the floor with 3/8” hex bolts (not included).
ACCESS FLOOR
Bolt the two mounting angles to the floor tile with 3/8” hex bolts and fender washers (not
included). If subfloor bracing is being used, extend 3/8” threaded rod through the floor tile
to the subfloor (not included).