Chatsworth Products Hot Aisle Containment - Manual (Page 39)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 39
STANDOFF ASSEMBLY
For access floor installations, a door standoff kit (PN 32870-X01 for the double door, PN
32871-X01 for the single left door, or PN 32871-X02 for the single right door) is required.
The standoff is mounted to the frame assembly as shown below. Attach the two side
standoffs to the side panels using six M6 pan head screws on each standoff. Attach the two
top standoffs to the side panels using three M6 pan head screws on each standoff.