Chatsworth Products Hot Aisle Containment - Manual (Page 27)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 27
FULL HEIGHT CABINET BLANKING PANELS
INTRODUCTION
The Full Height Cabinet Blanking Panel (P/N 33002-XXX) is an optional accessory that
is used with Build To Spec Kit to fill gaps between cabinets when cabinets are omitted.
COMPONENTS
The components required for each Full Height Cabinet Blanking Panel are illustrated
below. Kits are sold in 2 packs and 10 packs.
Extrusion, 94”L (2387 mm)
2 pieces- use to make the side of the panel
Universal Bulb Seal, 96”L (2438 mm)
2 pieces – use to seal the sides of the panel
Panel Clamp
5 pieces - Use to secure panel against duct.
Polycarbonate Panels
48” (1219 mm) W x 96” (2438 mm) L
1 piece – use to fill gap between cabinets
Plate Gusset
2 pieces - Use to attach the extrusion to the duct