Chatsworth Products Hot Aisle Containment - Manual (Page 26)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 26
1. Cut and assemble the
extrusion as shown above
with flat sides aligned to
form an end fascia.
2. Install the fascia as shown
to the left so that the flat
side faces the inside of the
contained aisle.
3. Measure and cut a
Polycarbonate Panel to fit
the fascia frame and install
with Panel Clips.
4. Attach the door to the
bottom of the end fascia
with several Mounting
Brackets.