Chatsworth Products Hot Aisle Containment - Manual (Page 28)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 28
INSTALLATION
1. Measure, cut and assemble the sides of the Full Height Cabinet Blanking Panel.
• Measure the height of
the opening – the
distance from the
floor to the bottom of
the duct.
• Cut the Extrusions
and the Universal
Bulb Seal to match
the height of the
opening.
• Slide the Universal
Bulb Seal onto the
Extrusion as shown
to the left.
• The Universal Bulb
Seal supports the
polycarbonate panel
and forms a seal
against the side of
the adjacent cabinets.