Flytec 5020 v1.18 * - Manual (Page 9)

Flytec 5020 technical manual
Sometimes the Flasher will give an error. In this case, the cable must be unplugged, and the
5020 turned off before making another attempt to flash the memory.
Important: Contrary to the instructions for data transfer of waypoints or routes, be sure
that the 5020 is turned off when plugging the cable into the computer and the 5020.
Important:
Never leave the PC cable hooked up to the unit when it is turned off. If this is
done energy is consumed, and the battery can be drained.
2 Technical Data
Measurements: 165 x 73 x 38 mm
Weight: 286 grams (with 4 Alkaline batteries, without harness)
Electrical supply: 2 or 4 alkaline batteries AA or Nickel metal hydride
accumulator 2 Ah; 1.2V
Battery life: > 30 hrs with 4 alkaline batteries
Altimeter: Max. 8000 m; 1 m (3 ft) steps
Variometer: Analog+/-8 m/s; (1600 ft/m); 0.2m/s (20 ft/m) steps
Variometer Digital +/-70m/s; (14.000 ft/m); 0.1m/s (20 ft/m) steps
Speed (vane wheel) Digital 0 - 120km/h (or mph or kts)
Waypoints: 200 WP
Routes: 20 routes with max. 30 WP in each
Restricted areas 20 CTR’s free, 150 CTRs due to costs
Max. memory time: 55 hrs flying time at 10 sec intervals
Number of track log points: 24 000
Number of registered flights: 100
Data memory and transfer according to the IGC format
Screen resolution
240 x 160 pixel (=1/8 VGA)
Operating temperature -15...45 °C
Brackets for hang-gliders or paragliders are available.
The technical details may be altered without notification. Software upgrades can be made by
downloading the latest firmware version from our homepage
3 Guarantee and liability
Our instruments carry a 24-month guarantee. However, physical damage such as a broken
casing or glass breakage as well as damage resulting from water landings are excluded from
this guarantee. Flytec can accept no liability for faults arising from any abuse or unapproved
use of your instruments.
WARNING
In very rare cases it can happen that a flight instrument does not provide any data at all or
the data is incorrect. Flytec AG will not be held responsible for accepting any damage
claims arising from a malfunctioning unit. Responsibility for ensuring the safe execution of
his/her flights lies with the pilot alone.
- 9 -