Horner APG RCX HE-CX251 - Manual

MAN0920-01-EN Specifications / Installation
__________________________________________________________________________________________________________________________________________________________________
9/1/2010
Page 1 of 2
1
Specifications
General Specifications
HE-CX116 HE-CX251
Required Power
(Steady State)
625 mA @ 24 VDC, max
Required Power
(Inrush)
30A for 1 ms @ 24 VDC
Primary Power Range 10 – 30 VDC
SmartStack Modules 4 maximum
Logic Memory 16KB 256KB
Ethernet Support No Yes
Relative Humidity 5 to 95% Non-condensing
Operating
Temperature
-10°C to +60°C
Weight 12 oz. (340.19 g)
USA
http://www.heapg.com/Support/compliance.
htm
CE & UL
Europe
http://www.horner-
apg.com/en/support/certification.aspx
2
Dimensions & Installation
Connectivity & Features
All Models (except where noted)
SmartStack I/O
Snaps on the side of RCX (up to 4). Provides a wide
variety of I/O options. Single-sided modules
recommended for Vertical mounting option
SmartStix I/O
Connects via CsCAN, DIN-rail mounted up to 500m away.
Terminal Block style I/O for easy wiring.
SmartRail I/O
Connects via Ethernet or CsCAN. Traditional I/O style,
with up to 8 modules per base.
RS-232 & RS-485 ports
Two simultaneous ports on one RJ-45 connector. MJ1 is
RS-232, MJ2 is RS-422 or RS-485 (dip switch)
10/100 Ethernet
(CX251 only)
Supports http and FTP. Supports Modbus/TCP master &
slave, and more factory protocols.
Default IP Address: 192.168.254.128
Portable Memory microSD up to 2GB for Datalogging
Real-time Clock +/- 1.53 min/month accuracy @ 25C
RCX Controllers:
HE-CX116 / HE-CX251
Power Connector
10-30Vdc Input
Torque rat. 4.5 – 7 Lb-In
(0.50 – 0.78 N-m)
P
Note on Installing SmartStack I/O with Vertical Mounting Option
Modules with I/O connectors on one-side only are recommended for convenient wiring access.
A plastic stabilizer bracket is included to be installed on the last module in the stack