Aalborg TIO Totalizer I/O Flow Monitor/Controller User Manual
Page 67
64
Figure 6.8 Dimensions for Panel Mounted Installation
b) Electrical Connection
TIO can be used with any generic flow meter / controller which supports
0-5 Vdc and / or 4-20 mA input / output interfaces. It also can be
ordered for 0-10 Vdc input / output interface (special order not
supported by generic models).
NOTE: Do not connect TIO input / output circuitry to voltages above
5.5Vdc unless TIO was specifically ordered for 0-10 Vdc input /
output interface. Check device part number or contact Aalborg
7
customer service for device input / output type verification.
,
Panel Mounting