Videotec ULISSE MAXI - Manual (Page 22)

EN - English - I
nstruc
tions manual
20
7.2.4 Video cable connection
h The installation is type CDS (Cable
Distribution System), do not connect it to
SELV circuits.
h In order to reduce the risk of fire, only
use cable sizes greater than or equal to
26AWG.
h Connect the screen and central cable
respectively to the GND and VIDEO
terminals. The terminals accept cables
with sections between 0.5 mm2 (AWG20)
and 0.08 mm2 (AWG28).
GND
VIDEO Signal
Fig. 35
7.2.3.2 Power supply connection 24Vac
Connect the power supply cables as described in the
table below.
POWER SUPPLY CONNECTION 24VAC
Colour Terminals
Defined by the installer (N) Neutral
Defined by the installer (L) Phase
Yellow/Green Earth
Tab. 04
h Only for products marked UL intended for
the North American market, use a class 2 UL
listed transformer.
7.2.3.3 Power supply connection
120/230Vac
Connect the power supply cables as described in the
table below.
POWER SUPPLY CONNECTION 120/230VAC
Colour Terminals
Blue (N) Neutral
Brown (L) Phase
Yellow/Green Earth
Tab. 05
h Use the appropriate junction-box
UPTJBUL to connect the power supply
line. For further information, refer to the
product use and installation manual.