High Country Tek PLD, Powerline / universal single / dual coil PWM Valve Driver - Manual (Page 18)

Part No:- 021-00155 RevD7 PowerLine System Controller User Guide Page | 18
PowerLine User Guide
Selection from Menu -> Restore Temporary Memory from Permanent Memory
Restores settings stored in permanent memory to temporary (operational) memory.
Caution: Use of this selection temporarily prevents the unit from working in the system.
Do not select this option while the machine is operating.
Selection from Menu -> Restore Temporary & Permanent
Memory from a File
When this selection is made, the user is prompted for a file
name and location from which to retrieve settings. The
restored values are placed in temporary and permanent
memory.
Caution: Use of this selection temporarily prevents the
unit from working in the system.
Do not select this option while the machine is operating.
Control Logic:
This drop down menu allows the user to
select what control mode the controller will
operate in:
1. Manual PWM control ( Set-up )
2. Anti-Stall (Reverse option available)
3. Anti-Stall with Max Command
4. Valve Control ( Single or dual coil )
IMPORTANT NOTE – DUAL COIL OPERATION:
The output of either ‘A’ or ‘B’ output will go from the respective ‘I Min’ setting to ZERO (0mA ) when crossing
through command mid-point. The valve outputs do NOT jump from one I Min to the other.