High Country Tek PLD, Powerline / universal single / dual coil PWM Valve Driver - Manual (Page 15)

Part No:- 021-00155 RevD7 PowerLine System Controller User Guide Page | 15
PowerLine User Guide
Opto 3000: USB serial Interface
The Opto 3000 is the newest way to interface with any PC running
Windows™ XP® Professional and Vista Business or Ultimate, to
program or observe operation of the PowerLine module.
The unit is USB compatible comes with all the cables needed to start
work immediately.
The Opto 3000 gets power from the PC USB port so the user should
take care to select a port that can support 5VDC output ( beware of
USB expansion hubs with maximum load limitations ). The unit has
TX and RX LED’s available to allow the user to observe activity on
the communications cable.
The kit has all the parts you will need to connect and/or externally
power the interface as required.
To begin using the Opto 3000, Locate a free USB communications
port on your computer . Connect and secure one end of the supplied
USB cable into the port of the computer, the other end into the Opto3000 connector.
Important NOTE:
The optical interface head that mechanically connects to the PowerLine module has a ‘RED mark’ on
one end - This mark should be facing towards the “PWR OK” indicator.