Outback Power Systems GS4048A Operators Manual - Manual (Page 49)

900-0161-01-00 Rev A 47
Metering
MATE3 Screens
The MATE3 system display can monitor the GS inverter and other networked OutBack devices.
From the Home screen, the Inverter “soft” key accesses the screens for monitoring the inverter.
Figure 12 Home Screen
Inverter Screens
The Inverter soft key opens a series of screens showing the inverter operating mode, battery voltage,
and status of several AC operations. The first screen displays AC information on the inverter’s L1 input
and output. The
soft key proceeds to a screen that shows the same information for L2. The
soft key will select other networked OutBack inverters, if present.
Figure 13 Inverter Screens
Screen items:
 The upper left corner is the Inverter Mode (see above). When Charging is indicated, the Charge Mode
specifies the stage.
 Invert displays the kilowatts and AC amperage generated by the inverter. It may go to loads, or in a
grid-interactive system it may be sold back to the utility grid.
Inverter Soft Key
Inverter Modes:

Inverting (see page 21)
 Searching (see page 23)
 Support (see page 14)
 Sell (see page 15)
 Charging (see Bulk on page 29)
 Charger Off (see pages 25 and 29)
 Float (see page 30)
 EQ (see page 33)
 Silent (see page 30)
 PassThru (see page 25)
 Error (see page 55)
 Off
Charge Mode Inverter Mode
Charge Modes (see page 27):

BULK
 FLOAT
 EQ