DAVIS DriveRight 600E Users Guide (8126, 8179) - Manual (Page 8)

4
Calibrating the DriveRight 600
E
Note: To exit the Settings Screens and view the Data Screens, press and hold MODE until
the Current Readings Screen displays.
CODE
ALARM
SETTINGS SETTINGS
CLEAR LOG
Alarm On/Off
Security Code (First Screen) Clear Log
AM
SETTINGS
DAY.MO
YEAR
Date Entry
Year Entry
Time Entry
km/h
SPEED
Km
Calibration
SETTINGS SETTINGS
SETTINGS SETTINGS
SETTINGS SETTINGS
DriveRight 600 E Settings Screens
Calibrating the DriveRight 600
E
Once the DriveRight 600
E
is installed in a vehicle, calibrate the device so
that it reports the correct speed, distance, deceleration, and acceleration.
All General Duty and Heavy Duty (# 8126GD and # 8126HD) versions of
DriveRight 600
E
should be calibrated using the speedometer (see
“Calibrating Using the Speedometer” on page 5), or by using the distance
reading (see “Calibrating Using Distance Readings” on page 7).
The VSS (vehicle speed sensor) version (# 8126VSS) of the DriveRight
600
E
should be calibrated if the vehicle’s VSS pulses per mile is different