DAVIS DriveRight 600E Users Guide (8126, 8179) - Manual (Page 24)

20
Miscellaneous Information
• Set the Date — Press PLUS and MINUS to toggle through the numbers
for each segment. Press SET/CLEAR to move through each digit.
• Change the Time Display Format — Press and release SET/CLEAR
until the “MO:DAY” (Month:Day) or “DAY.MO” (Day.Month)
segment is flashing. Press PLUS to toggle between the two segments.
When the desired format appears in the display, stop. The segment
displayed when MODE is pressed to exit this screen is the format in
which the date is displayed.
Year Entry
The Year Entry Screen allows you to enter the correct year, which lets the
DriveRight 600
E
automatically adjust for leap years.
YEAR
SETTINGS
Year Entry Screen
The following option is available in the Year Entry Screen:
• Set the Year — Press PLUS and MINUS to toggle through the num-
bers for each segment. Press SET/CLEAR to move through each
digit.
Miscellaneous Information
Accident Log
The DriveRight 600
E
has enough memory for 10 “accident” logs, which
show the vehicle‘s speed for the 20 seconds before and after a sudden
deceleration. Data is written to the “accident” log any time the vehicle
exceeds the DriveRight 600
E
’s set deceleration limit. Also, the last 20
seconds of trip information for each of the last 20 trips is saved in the
accident log.
The information in the accident log may be downloaded, viewed, printed,
and stored using FMS.
Tamper Log
The following actions are logged as tamper attempts:
• The DriveRight 600
E
is unplugged (loses power).
• Five incorrect entries in a row in the Security Code Screen.
• DriveRight 600
E
is plugged back into the vehicle (a tamper is logged
but not displayed on the device).