DAVIS DriveRight 600E Users Guide (8126, 8179) - Manual (Page 10)

km/h
MPH SPEED
DISTANCE
MILES
K
m
SETTINGS
Speed Reading
Distance Reading Calibration Speed
6
Calibrating the DriveRight 600
E
Calibration Screen
4. Drive the vehicle until it reaches 40 km/h (25 mph) and keep the
vehicle steady at that speed.
5. Press and hold SET/CLEAR once the vehicle is moving steadily at the
calibration speed.
The word CAL appears in the top right of the display. This indicates
that the DriveRight 600
E
is in the process of calibrating.
km/h
SPEED
DISTANCE
Km
SETTINGS
Unit Calibrating
Unit Calibrating
6. Continue to hold SET/CLEAR until the DriveRight 600
E
beeps and the
word “DONE” appears on the display. The DriveRight 600
E
has
finished calibrating. The speed reading at the top of the display also
changes so that it reads closer to the vehicle’s speedometer reading.
km/h
SPEED
DISTANCE
K m
SETTINGS
Unit Finished Calibrating
Unit Finished Calibrating
7. Once the calibration is complete, drive the vehicle and compare the
vehicle’s speedometer to the DriveRight 600
E
’s speed display.