DAVIS DriveRight 600E Users Guide (8126, 8179) - Manual (Page 22)

CLEAR LOG
SETTINGS
18
Settings Screens
Preparing to Clear Log Data
Continue to hold SET/CLEAR until the DriveRight 600
E
beeps and
“CLR” disappears from the display. This indicates that the DriveRight
is in the process of clearing data. The DriveRight beeps and “DONE”
appears in the display when the DriveRight finishes clearing data.
CLEAR LOG
SETTINGS
DriveRight Finished Clearing Data
Alarm On/Off Screen
The Alarm On/Off Screen toggles the DriveRight 600
E
’s audible alarm on
and off. When the alarm is on, the DriveRight 600
E
beeps when any of the
set limits are exceeded, warning the driver of the violation. Turning the
alarm off disables the beeping, though the DriveRight 600
E
continues to
record violations of the set limits.
ALARM
SETTINGS
Alarm On/Off Screen
The following option is available in the Alarm On/Off Screen:
• Toggle the Alarm Setting — Press and release SET/CLEAR to toggle
the alarm setting from On to Off (or vice versa). Each time SET/
CLEAR is pressed, the display changes between “ON” and “OFF”.
Calibration Screen
The Calibration Screen calibrates the DriveRight 600
E
for the desired
vehicle. See “Calibrating the DriveRight 600
E
” on page 4 for details.