DAVIS DriveRight 600E Users Guide (8126, 8179) - Manual (Page 23)

19
Settings Screens
Time Entry
The Time Entry Screen enables you to set the time and to select the
format (12-hour or 24-hour) in which you want time displayed.
AM
SETTINGS
Time Entry Screen
The following options are available in the Time Entry Screen:
• Set the Time — Press PLUS and MINUS to toggle through the
digits for each segment on the time display. Press SET/CLEAR to
move through each segment on the time display. Press SET/CLEAR
until the time format flashes. Press PLUS or MINUS to toggle
through the three available options: “AM”, “PM”, or “24HR”. If the
time entered is in the 12-hour format, remember to select either AM
or PM.
• Change the Time Display Format — Press and release
SET/CLEAR until the “AM”, “PM”, or “24HR” segment is flashing.
Press PLUS to cycle through the three possible options. When the
desired option appears in the display, stop. The segment displayed
when MODE is pressed to exit this screen sets the format that is
displayed.
Note: The DriveRight 600
E
does not automatically convert the time from 12-hour to 24-
hour or vice versa. Enter the time in the new format manually.
Date Entry
The Date Entry Screen allows you to set the date and to select the for-
mat (Day.Month or Month:Day) in which the date is displayed.
DAY.MO
SETTINGS
Date Entry Screen
The following options are available in the Date Entry Screen: