DAVIS DriveRight 600E Users Guide (8126, 8179) - Manual (Page 7)

3
DriveRight 600
E
Screens
Data Screens
The Data Screens display most of the information stored in the
DriveRight 600
E
device. To cycle through the Data Screens (in the
order shown below), press and release MODE several times.
The GPS Latitude and Longitude Screens are not displayed if the
DriveRight 600
E
device is not connected to a vehicle with a
corresponding GPS module or if the device has not been configured to
log GPS data via FMS.
DriveRight 600 E Data Screens
Settings Screens
Press and hold MODE in any of the Data Screens to view the Settings
Screens. After a few seconds, the Security Code Screen displays. To
cycle through the settings screens (in the order shown on the following
page), press and release MODE.