DAVIS DriveRight 600E Users Guide (8126, 8179) - Manual (Page 14)

10
Data Screens
Note: Although trip type can be specified using the DriveRight 600
E
display device, FMS
must be used to view the trip type for each trip.
• Turn Display Lamp On/Off — To turn the DriveRight 600
E
’s display
lamp on or off, press PLUS. View the Current Readings Screen, or the
GPS Screen to turn the display lamp on and off.
Note: The lamp does not turn off if the vehicle is in motion. The lamp automatically turns off
once the log out time has elapsed.
Driver ID Code Entry & Digital Input Status
Screen
Enter the Driver ID Code in the Driver ID Code Entry Screen to display
the status of the two digital inputs, and view an activity indicator for the
reed switch (GD and HD models) or VSS input (VSS model).
CODE
Driver ID
Digital
Input 1
Digital
Input 2
Activity Indicator
Driver ID Code Entry Screen
Driver ID Code
When using the DriveRight 600
E
to monitor multiple drivers, assign each
driver a unique 4-digit ID code. Before driving the vehicle, the driver must
enter his or her ID code. Manual entry of the Driver ID can be disabled
using FMS if the SmartCard On-Board Reader (#8105) is being used to log
drivers in and out of the vehicle.
The DriveRight 600
E
stores the Driver ID Code with the rest of the trip
information. Data downloaded to FMS is segregated by Driver ID Code,
enabling detailed tracking of multiple drivers. If the Driver ID Code is set
for a single user, Location IDs can be identified using FMS (see FMS
Online Help for more information). Also, use FMS to turn on an alarm
which will alert the driver when a Driver ID (or Location ID) has not been
entered.