DAVIS DriveRight 600E Users Guide (8126, 8179) - Manual (Page 25)

21
Miscellaneous Information
• DriveRight 600
E
is manually rebooted.
When a tamper is logged, “TAMPER” displays on all screens if the
tamper light has been enabled using FMS. The time at which the
tamper attempt occurred and the cause of the tamper are also stored in
the tamper log. The last 10 tamper events can be downloaded, viewed
and printed, using FMS.
To clear the flashing TAMPER segment, enter the correct security code
(see “Security Code Screen” on page 16). The tamper indicator is also
cleared after data is downloaded.
km/h
SPEED
ACCEL
G
DISTANCE
K m
CURRENT
Tamper Indicator Flashing
TAMPER
DAY.MO
Tamper Indicator (Current Readings Screen)
Note: All data in the DriveRight 600 E is stored in “non-volatile” memory which means no
data is lost even if power is removed.
Battery Operation
The DriveRight 600
E
is designed to be taken out of your vehicle so the
data may be reviewed anywhere. When the DriveRight 600
E
is
disconnected from the vehicle (its primary power source), it
automatically switches to battery power. “BAT” displays in the lower
left corner of all screens to indicate that it is currently running on
battery power.
km/h
MPH SPEED
ACCEL
G
DISTANCE
K m
CURRENT
Battery Indicator
BAT
DAY.MO
Battery Power Indicator
Note: If the LCD display fades when running on battery power, the battery power is low.
Replace the battery as soon as possible.