DAVIS DriveRight 130AL Manual (8140) - Manual (Page 26)

Page 24
M ISCELLANEOUS I NFORMATION
Tamper Protection
The DriveRight 130AL will alert you if anyone attempts to tamper with the
unit, provided that you have entered a code other than 0000. If anyone discon-
nects power from the unit or if an incorrect code is entered five times, the Drive-
Right 130AL automatically records the time at which the tampering occurred.
The word TAMPER appears on all screens until a correct code is entered.
If you press and hold down MODE to access the settings screens, the tamper time
screen appears. This screen shows the time and date the tampering occurred. Note
that the unit only records the first time tampering occurred. Any subsequent
attempts to tamper with the unit are not recorded until the tamper segment is
cleared by entering the correct code.
Once the tamper segment appears, it remains on the display until you correctly
enter your code. To clear the tamper segment, press MODE until the code entry
screen appears and enter your code (see “Code Entry Screen” on page 18).
If all power is removed from the unit (including the battery) the DriveRight
130AL will show the half-hour prior to the time power was removed. For example,
if power was removed at 2:37, the DriveRight 130AL would record 2:30. If power
was removed at 4:25, the DriveRight 130AL would record 3:30.
NOTE: All data in the log is stored in “non-volatile” memory which means that
even if power is removed, this data will not be lost.
AM SPEED
km/h
ACCEL
G
DISTANCE
TAMPER
Km
CURRENT
Flashing Tamper Indicator
TAMPER
PM
MO DAY
Time Tampering Occurred
Date Tampering Occurred