Code entry screen, When the correct code is entered, press mode – DAVIS DriveRight 130AL Manual (8140) User Manual

Page 20

Page 18

Code Entry Screen

The DriveRight 130AL uses a four-digit code to protect logged data and limit
settings from unauthorized tampering. Until the correct code is entered from
this screen, you may not advance to or use any further settings screens. If some-
one enters an incorrect code, the tamper indicator appears. For more informa-
tion on tamper detection, see “Miscellaneous Information” on page 24.

NOTE:

If you do not wish to use a code in operating the DriveRight 130AL, simply

set the code to "0000"(the default code). When the code entry screen appears,
simply press MODE to enter "0000"as the correct code. Using “0000” as the
code also disables the tamper feature.

To move past the code entry screen, enter your code as described below.

1. From the code entry screen, use

"+"

and

"-"

to enter the correct

code.

2. When the correct code is entered, press

MODE

If the entered code is correct, the clear all log data screen appears. If the
entered code is not correct, the word NO appears on the display. You may
attempt to enter the correct code five times before the unit returns you to the
current readings screen and activates the tamper indicator.

CODE

SETTINGS

Code Setting

CODE

TAMPER

SETTINGS

Invalid Code Indicator

Tamper Indicator