Installing carchip in your car – DAVIS CarChip Online Help (8210, 8211, 8220, 8225) User Manual
Page 7
Welcome to CarChip
3
Installing CarChip in your Car
Follow these steps to install the CarChip data logger in your car.
1. Find the OBDII port on your car.
The OBDII port is located within 3 feet of the steering wheel, usually near the general area indicated by
the dotted line in the following illustration. The port should be easily accessible to a person in the driver's
seat.
Note: Use the Davis Instruments' CarChip web site to locate the OBDII connection on your car.
2. Check the following areas for the OBDII port:
Under the Dash
Behind a small access panel in the dash
In front of the passenger seat In or around the center console
Behind the ash tray
3.
Plug the CarChip data logger into the OBDII connector.