AMT Datasouth 4000 - Manual (Page 38)

User's Guide 38
Setup Feature and Value List (continued)
Emulation Mode [ PAL, ASCII, Hex, Display ] Selects active emulation. ASCII
emulation is a basic text
emulation. Hex and Display
emulation's are used for printing
data in a format which shows
the exact data being received by
the printer. This is useful trouble
shooting communications or
host programming issues.
Date [MM/DD/YYYY] If RTC option is installed, this
feature allows the date to be set.
Press the Cancel key to select
Month/Date/Year to modify.
Press FEED+PAUSE or
FEED+CANCEL to modify then
press Cancel again to select
next parameter. When the full
date is displayed the change is
complete.
Time [HH:MM:SS] If RTC option is installed, this
feature allows the time to be set.
The hour is set in 24 hour format
(0-23). Press the Cancel key to
select Hour:Minutes:Seconds to
modify. Press FEED+PAUSE or
FEED+CANCEL to modify then
press Cancel again to select
next parameter When the full
time is displayed the change is
complete.
Daylight Savings [Enabled, Disabled] If RTC option is installed, this
feature specifies whether the
time is automatically updated for
Daylight Savings time.
Print Features N/A Press CANCEL to print the
feature list.
Print Test Label N/A Press CANCEL to print a test
label.
Firmware Rev. N/A Firmware P/N and revision