AMT Datasouth 4000 User Manual
Page 20
User's Guide 20
5. Unwrap the ribbon and place the Ribbon Supply Roll on the Ribbon Supply Spindle
located towards back of printer.
Figure 12 - Ribbon Take-Up Core
6. Place the Ribbon Take-up core on the Ribbon Take-Up Spindle located towards the front
of the printer.
7. Slide both cores completely towards the center of the printer.
8. Route the ribbon under the print mechanism.
9. Important: Route ribbon under and around back of Ribbon Take-Up Core before
attaching using tape or adhesive leader.
10. Tighten ribbon by manually rotating the Take-up Core counter-clockwise.
Figure 13 - Ribbon Routing
Supply Roll and Supply Spindle
Empty Take-up core
Take-up Spindle
Front of Printer
Ribbon Take-Up Roll
Ribbon Supply Spindle
Ribbon Take-Up Spindle
Ribbon Supply Roll