AMT Datasouth 4000 - Manual (Page 33)

User's Guide 33
LCD Display
The front panel is equipped with a 2 row by 16 character back-lit Liquid Crystal Display
(LCD).
The basic function of the display is to:
# Display the printer line status
# Display error conditions
# Display the name and state of a PAL TM program loaded and running on the printer.
# Display setup features and values.
# Display data prompts requesting data from an attached keyboard or bar code reader.
These prompts vary depending on the individual PAL
TM program loaded on the printer.
Standard On Line Display (no PAL TM program loaded)
After power on the following message is displayed on the LCD
On Line:
PAL Emulation
Standard Off Line Display
When the printer is placed Off Line the following message is displayed even when a .
PAL
TM program is loaded. When placing the printer back On Line, any message previously
written to the LCD is automatically restored.
Off Line:
PAL Emulation
Typical Setup Mode Display
During setup mode, the top line displays the feature name and the bottom line displays the
feature value. When the top line is not blinking, the feature may be selected. When the top
line is blinking, the value may be adjusted.
Media Type
Thermal Transfer