AMT Datasouth 4000 - Manual (Page 29)

User's Guide 29
Key Operation
The Front Panel keys serve multiple functions. Refer to the following tables for their specific
functions.
Power up key functions
The table below indicates the function performed when a key is pressed and held while the
printer is powered up.
Key Function
FEED The printer generates a configuration label
showing current feature settings, firmware
revision, and PAL
TM drive storage capacity.
PAUSE The printer performs a Calibration test which
adjusts the sensor sensitivity, measures the
label length, and measures gap/notch. hole.
These values are stored in non-volatile memory.
CANCEL PAL TM program loaded: When a PAL TM
program is loaded it runs automatically on
power up. Pressing this key bypasses the
program and places the printer in normal mode.
The most common reason to bypass a PAL
TM
program on power up is to allow a new or
updated program to be loaded in the printer.
No PAL TM program loaded: No function.