AMT Datasouth 4000 - Manual (Page 15)

User's Guide 15
UNPACKING AND INSPECTION
This section is provided to assist you in taking the printer from the shipping container to the
application environment and ready for use.
1. Remove top foam packing piece.
2. Lift printer straight up out of box carefully with adequate assistance.
3. Remove accessory kit and supplies.
4. Remove printer from plastic bag.
NOTE: Save box and all packing materials for future use, in the event
the printer needs to be shipped. Units returned for service in
non approved packaging may void the warranty or increase
repair costs due to shipping damage.
Verify that the printer box contains the following materials when unpacking:
a. Printer
b. Quick Start Up Guide
c. Power cord
d. CD or disks with User's manual and Windows drivers
e. Take up Core
f. A sample ribbon roll and a take-up ribbon core.
g. A sample media roll (not pictured)
Figure 5 - Shipped with Printer