JKS OGS128 User Manual
Installation instructions, Welcome, Important
JKSOGS128
JKS Adjustable HD Trackbar Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Front HD Trackbar
Part Number: JKSOGS128
Applications: Jeep Wrangler TJ, 1997-06
Jeep Grand Cherokee ZJ, 1993-98
Jeep Cherokee XJ, 1984-01
Jeep Comanche MJ, 1986-92
Welcome
CONGRATULATIONS on purchasing a new Adjustable
HD Trackbar from JKS Manufacturing. We are committed
to providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
NOT COMPATIBLE WITH right hand drive vehicles.
RE-TORQUE ALL FASTENERS after driving 150 miles.
CHECK TORQUE SPECIFICATIONS as part of normal
vehicle maintenance.
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
Tie Rod End Remover *
Tape Measure
1-1/2” Open-End Wrench
5/8” Drill Bit
1/2” Drill Bit
Heavy Duty Ratchet Strap *
Anti-Seize Lubricant
Grease Gun with Zerk Fitting Coupler
Wheel Bearing Grease
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description
QTY
A
Female Threaded (Chassis) End
1
B
1-1/4” NF Jam Nut
1
C
Male Threaded (Axle) End
1
D
1/2” x 2-1/2" Grade 8 Bolt
1
E
Sleeve
1
F
Polyurethane Bushing Half
2
G
1/2" Flanged Locking Nut
1
H
5/8” x 4-1/2” Grade 8 Bolt
1
I
Preload Ring
1
J
Nylatron Bushing Half
2
K
Flex Joint Ball
1
L
Retaining Washer
1
M
5/8" Locking Nut
1
N
Grease Zerk
1
O
Set Screw
1
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036