JKS 9800 - Manual

JKS9800 JKSTelescoping Trackbar Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Telescoping Trackbar™
Part Number: JKS9800
Applications: Jeep® Wrangler YJ, 1987-95
Welcome
CONGRATULATIONS on purchasing a new Telescoping
Trackbar™ from JKS Manufacturing. We are committed
to providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
COMPATIBLE WITH the front of 1987-95 Wrangler YJ
models only. Do not attempt to modify or install this
product on any other application or location.
NOT COMPATIBLE WITH coil-spring conversion systems.
NEVER UNLOCK TRACKBAR when operating vehicle
on public roads.
CHECK TORQUE SPECIFICATIONS regularly.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 1-1/8” and 9/16” Open-End Wrenches
 Drill with 1/2” Drill Bit
 Grease Gun with Zerk Fitting Coupler
 Wheel Bearing Grease
 Welder *
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description
A Outer Tube (Chassis End)
B Slip Shaft (Axle End)
C 1/2” Ovalok Nut
D 3/4” Teflon Lined Rod End
E 3/4” Jam Nut
F Polyurethane Dust Boot
G 1/2” x 3” GR8 Bolt
H 3/8” x 1-3/4” GR8 Bolt
I 3/8” Nylock Nut
J Clamp
K Grease Zerk Cap
L Grease Zerk
M 1/8” Shoulder Spacer (narrow)
N 1.85” OE Bracket Spacer
O 5/16” Shoulder Spacer (wide)
P 1/2” x 4-1/2” GR8 Bolt