JKS 9400 - Manual

JKS5006-5007-9300-9400 JKS Quick Diconnect Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Quick Disconnects™
Part Number: JKS5006 - JKS5007 - JKS9300 - JKS9400
Welcome
CONGRATULATIONS on purchasing a set
of new Quick Disconnects™ from JKS Manufacturing.
We are committed to providing you with the best products
available and your satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
NOT COMPATIBLE WITH aftermarket swaybars. Install
product with Original Equipment swaybar only.
SOME VEHICLES MAY REQUIRE extended front brake
hoses or other modifications to compensate for ad-
ditional suspension travel.
NEVER DISCONNECT swaybar when operating vehicle
on public roads.
WHEN DISCONNECTED, swaybar must be secured to
prevent interference with other suspension compo-
nents or axle.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Angle Measuring Tool
 Grease Gun with Attachment for Flush
Mount Zerk Fittings
 Wheel Bearing Grease
Parts
Description
A 5/8” Polyurethane Bushing
B Lower Male End
C Flush Mount Grease Zerk
D Stainless Steel Lynch Pin
E Upper Female End
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036