JKS 2200 - Manual (Page 4)

JKS2200 JKS Adjustable Coil Spacer Installation 4 Page
‰ 5. RE-INSTALL FRONT COIL SPRINGS
 Re-install the front coil springs per the factory
service manual instructions for your vehicle. HINT:
A coil spring compressor is useful for installation.
 Also re-install any of the components that were
removed during the REMOVE FRONT COIL
SPRINGS step of this installation.
ATTENTION INSTALLER
IMPORTANT NOTE REGARDING
SHOCK ABSORBERS
Most vehicles will require additional parts or
modifications to accommodate the increase in
ride height provided by the ACOS system.
To prevent the coil springs from becoming un-
seated during maximum suspension extension,
correct length shock absorbers must be installed.
Operation
Future ride height adjustments should be made with
NO LOAD on the front coil springs, and the suspen-
sion at FULL DROOP.
NEVER turn Adjuster Ring (B) while under tension,
and ALWAYS apply spray lubricant to Threaded Tube
(C) before adjusting.
Maintenance
Regular cleaning with pressurized water is recom-
mended to maximize ease of operation and reliability.
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 9/30/2013