Maintenance – JKS 8100 User Manual
Page 3
JKS8100
JKS 1" Budget Motor Mount Installation
Page 3
4. REPEAT AND TIGHTEN HARDWARE
Repeat Steps 2 and 3 on opposite side of vehicle
BEFORE tightening mounting hardware.
Using a torque wrench, tighten the cross bolt to 60
ft-lbs., and 10mm nuts to 30 ft-lbs.
5. CHECK FAN SHROUD CLEARANCE
Before starting engine, check for interference be-
tween the fan shroud and fan blades. If necessary,
trim the fan shroud until it completely clears any
interferences.
Maintenance
Check all torque specifications as part of regular
vehicle maintenance schedule.
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 10/30/2013
See also other documents in the category JKS For the car:
- 9901 (4 pages)
- 9902 (4 pages)
- 9903 (4 pages)
- 9904 (5 pages)
- OGS115 (2 pages)
- OGS161 (4 pages)
- OGS168 (3 pages)
- OGS169 (2 pages)
- OGS920 (2 pages)
- OGS999 (3 pages)
- 2944 (2 pages)
- 9601 (2 pages)
- 9602 (2 pages)
- 9603 (2 pages)
- 9604 (2 pages)
- 9605 (2 pages)
- 9607 (2 pages)
- 9608 (2 pages)
- PN2291 (2 pages)
- PN2292 (2 pages)
- OGS166 (9 pages)
- OGS924 (2 pages)
- OGS960 (6 pages)
- TR100 (1 page)
- TR300 (1 page)
- PN TR301 (1 page)
- 1100 (4 pages)
- 1600 (1 page)
- 2200 (4 pages)
- 2210 (5 pages)
- 2400 (2 pages)
- 2550 (3 pages)
- 2570 (4 pages)
- 2700 (8 pages)
- 2710 (5 pages)
- 6100 (3 pages)
- 6125 (3 pages)
- 6155 (2 pages)
- 7100 (2 pages)
- 7101 (2 pages)
- 7150 (3 pages)
- BSE201 (5 pages)
- BSE251 (6 pages)
- OGS651 (1 page)