EOTech MTM Mini-Thermal Monocular - Manual (Page 60)

3-6
3.3 CORRECTIVE MAINTENANCE PROCEDURES -
Continued
Replacing Battery Cap Lanyard
No tools are required to perform this procedure.
1. Unscrew the battery cap until it comes free of the battery
compartment threads.
2. Pull the battery cap lanyard over the battery compartment
threads.
3. Separate the lanyard from the battery cap.
4. Stretch smaller eye of the replacement lanyard over the
post on the battery cap.
5. Pull large end of replacement lanyard over battery cap
threads (see Figure 3-2). Work the lanyard down until it
is seated neatly in the groove closest to the WTM
housing.
Figure 3-2 Replacing Battery Cap Lanyard
6. Replace and tighten battery cap.
POST