EOTech MTM Mini-Thermal Monocular - Manual (Page 28)

2-8
2.3 MOUNTING PROCEDURES – Continued
Mount the WTM to the weapon rail as follows:
Figure 2-7 Weapon Mount Adapter Installed
1. Loosen the clamping knob on the weapon mount adapter
until the jaws have sufficient space to fit over the
weapon’s rail.
2. Position the weapon mount adapter on the rail, ensuring
that the recoil lug is seated in the desired recoil groove of
the rail.
3. Turn the clamping knob clockwise as tightly as fingers
allow, then use a coin or similar flat object in the slot of
the clamping knob to turn it an additional 180 degrees.
4. Zero the WTM to the host weapon on a 25-meter range
per section 2.4.
RECOIL LUG