EOTech MTM Mini-Thermal Monocular - Manual (Page 48)

2-28
2.16 MAIN MENU – Continued
3. Activating the EL sub-menu item moves the reticle along
the vertical axis. Press PWR to select and use the UP /
DOWN buttons to move the center of the reticle up or
down.
4. Activating the OFF sub-menu item toggles the reticle off
and returns the display to the Main Menu.
NOTE
When adjusting reticle position, AZ (azimuth) and
EL (elevation) values are displayed in the lower
left corner of the display. The numbers represent
“clicks” of the reticle. Azimuth and elevation
values can rapidly be returned to 0 by pressing the
UP / DOWN buttons simultaneously. When in
ZOOM 1X mode, the reticle is moved in 2-click
increments each time the UP / DOWN buttons are
pressed. The reticle is moved in 1-click
increments when in ZOOM 2X mode. Once
adjusted, the reticle position will remain at that
setting (even if the WTM is turned off) until
readjusted by the operator.
HAND / HELMET
Activating the HAND / HELMET menu item toggles between
these two display options to accommodate the WTM being
used as either a handheld or helmet-mounted device.
Toggling between the two options will rotate all text (not the
image) 180 degrees for readability purposes and ease of
use. The position of the reticle is unaffected and will remain
aligned to the laser.