EOTech MTM Mini-Thermal Monocular - Manual (Page 52)

2-32
2.17 IMAGE ADAPTER CABLE – Continued
Retrieving Stored Images
Images stored in the WTM may be downloaded to the Image
Adapter Cable and converted to either a .tiff or .jpeg file
format (depending on model). Once downloaded, images
may then be viewed, saved, edited, and/or deleted by a PC
in the same manner as any files accessed through an
external drive. The Image Adapter Cable can store in
excess of 400 .tiff files. Storage capacity for .jpeg files is
considerably higher.
NOTE
The download process does not remove any of the
raw images from the WTM’s flash memory.
Deleting saved pictures from the WTM must be
accomplished as described in section 2.16,
Review (REV).
1. Plug the Image Adapter Cable into the WTM by aligning
the white dot on the cable plug with the white dot on the
video jack. Push the cable plug into the jack until it locks
into place.
2. Insert the Image Adapter’s Universal Serial Bus (USB)
connector into a free USB port on the computer. The PC
will recognize the Image Adapter as an external hard
drive and will normally open a Windows Explorer dialogue
box to display the contents of the drive.
3. Wait for the LED on the Image Adapter to turn solid
green. Other LED status indicators are described in
Table 2-5.