EOTech MTM Mini-Thermal Monocular - Manual (Page 26)

2-6
2.3 MOUNTING PROCEDURES – Continued
1. Unscrew the adjustment knob to its full and open position.
2. Gently push the WTM away from the operator’s head and
rotate clockwise or counterclockwise until proper
positioning is achieved. Tighten the adjustment knob to
lock the WTM in place.
Mounting to a Weapon
Weapon mount adapters are available that allow the WTM to
be installed on any weapon equipped with a Picatinny
(MIL-STD-1913) or Weaver rail. Regardless of the type of
adapter that you are issued, the procedure for attachment to
the WTM is the same.
Figure 2-5 Weapon Mount Adapter
CLAMPING
KNOB
LEVER LOCK
LEVER POST
QUICK
RELEASE
LEVER