EOTech MTM Mini-Thermal Monocular - Manual (Page 51)

2-31
2.17 IMAGE ADAPTER CABLE – Continued
Viewing Live Imagery
Viewing live thermal imagery from the WTM on an external
monitor is accomplished by:
1. Remove the video jack plug (captive to the WTM) from
the video jack.
2. Plug the Image Adapter into the WTM by aligning the
white dot on the cable plug with the white dot on the jack.
Push the cable plug into the jack until it locks into place.
3. Attach the BNC connector to an external monitor or
television.
4. Follow the WTM startup procedures contained in section
2.13 and ensure RS170 video format is selected from the
Main Menu as described in section 2.16, RS170 / VGA.
5. Follow instructions provided by the manufacturer of the
monitor or television for viewing video from an external
device.
CAUTION
When the cable plug is inserted into the video
jack, it automatically locks in place. To remove it,
pull straight back on the cable plug. Do not
remove the cable plug by pulling on the cable.