EOTech MTM Mini-Thermal Monocular - Manual (Page 29)

2-9
2.3 MOUNTING PROCEDURES – Continued
NOTE
The WTM may be placed at any position (forward
and aft) on the rail that is most convenient for the
operator. If, however, the WTM is removed from
the rail, the operator must make note of the
position at which it was zeroed, and return it to
that same position to ensure that zero is
maintained.
NOTE
If, for whatever reason, the lever lock becomes
loose, retighten and perform the 25-meter zeroing
procedure described in section 2.4.
2.4 ZEROING PROCEDURES
This procedure is used to zero the WTM to the host weapon
on a 25-meter range.
NOTE
Each click of the WTM reticle moves the shot
group 3.1cm at 25 meters (when in ZOOM 1X).
Other click equivalents are provided in Table 2-1.
Changing the position of the reticle corresponds to
a subsequent change in shot group movement
(i.e., the UP button will move the strike group up).