EOTech MTM Mini-Thermal Monocular - Manual (Page 53)

2-33
2.17 IMAGE ADAPTER CABLE – Continued
4. Press the Download Button. This action downloads all
images stored in the WTM’s flash memory, converts them
to .tiff (or .jpeg) format, and saves them to the flash
memory of the Image Adapter Cable. The LED on the
Image Adapter will flash green during this process.
NOTE
The Image Adapter creates a separate folder for
each of the WTM devices it has been connected
to. Initiating the download process from the same
WTM will cause the Adapter to overwrite the
existing folder. Renaming the folder prior to
downloading new images will preserve the content
of the original folder.
5. Wait for the LED on the Image Adapter to return to a
steady green state indicating that the transfer process is
complete. Open or refresh the Windows Explorer
dialogue box to view the contents of the Image Adapter’s
flash memory. Images may then be viewed, saved,
edited, and/or deleted in the same manner as any files
accessed through an external drive.
Table 2-5 LED Status Indicators
LED Indicator Status Condition
Green (steady) Powered and passed self test
Green flashing Data transfer in progress
Red (steady) Powered but failed self test
Red flashing Operational error