Ag Leader ParaDyme Auxiliary Harness Installation - Manual (Page 5)

Auxiliary Harness Installation Guide 5
Permanent Installation Procedure
7. Route the harness into the extrusion cable tunnel and secure using cable ties. Remove the plastic trim along the length of
the extrusion as necessary to route the harness through the cable tunnel. See Figure 3.
Figure 3 Route the Auxiliary Harness
8. Replace the plastic trim. See Figure 4.
Figure 4 Auxiliary Harness Routed Across the Extrusion
9. Replace the antennas that were removed in Step 4. Tighten the antennas hand tight - do not use tools to tighten the
antennas.