Overview – Ag Leader ParaDyme Auxiliary Harness Installation User Manual
Page 3
Auxiliary Harness Installation Guide
3
Overview
Overview
This guide describes the installation of the ParaDyme system optional Auxiliary Harness Part Number 201-0433-02. Read this
guide and familiarize yourself with the system before you install and use the Auxiliary Harness.
The ParaDyme system Auxiliary Harness connects the Roof Module to external devices such as a cell phone booster, weather
station or USB thumb drive. The Auxiliary Harness is required for software upgrades using a USB thumb drive or when
servicing the Roof Module.
Figure 1
ParaDyme System Auxiliary Harness (PN: 201-0433-02)
Table 1
ParaDyme System Auxiliary Harness (PN: 201-0433-02)
Note: To connect to “SERIAL A” or “SERIAL B” using a DE-9 connector you must first connect an adapter cable, PN
201-0450-01.
Table 2
ParaDyme System Auxiliary Harness Pin-Outs
Item
ID
Type
Function
1.
RM Aux.
Deutsch DT06-12SB Connects the cable to the ParaDyme Roof Module
2.
USB
USB Female
USB port for software uploads
3.
Serial A
Deutsch DTM04-4P
Serial cable connection for serial device
4.
Serial B
Deutsch DTM04-4P
Serial cable connection for future use
5.
Power Out
Deutsch DT06-2S
12Vdc power for accessories
Item
Connector
Pin 1
Pin 2
Pin 3
Pin 4
3.
Serial A
RS232 Rx
RS232 Tx
RS232 Gnd
RS232 CTS
4.
Serial B
RS232 Rx
RS232 Tx
RS232 Gnd
No connect
5.
Power Out
Power out
Return
1
2
3
4
5