HP Officejet 7110 Wide Format ePrinter - H812a User Manual

Page 88

NOTE: If your wireless router or Apple AirPort Base Station is using a hidden SSID, your printer

cannot automatically detect the network.

A: Make sure the printer is on the network

If the printer supports Ethernet networking and is connected to an Ethernet network, make sure

an Ethernet cable is not plugged into the back of the printer. If an Ethernet cable is plugged into

the back, then wireless connectivity is disabled.

If the printer is connected to a wireless network, run the Wireless Network Test. For more

information about how to print the wireless test page, see Test the wireless connection

After the page has been printed, check the wireless connection status, the Network Name

(SSID), and the IP address:

Connected

The Connected is listed in the Connectivity area, the

Diagnostics Results section, which indicates if the printer

is connected to your network — either your Ethernet

network or your wireless network.

●

If the Connected is Ready, the printer is actively

connected to a network.

●

If the Connected is Offline, the printer is not

connected to a network.

Network Name (SSID)

The Network Name (SSID) is listed in the Current

Configuration setction, which shows the network name

what your printer choose for connecting the wireless

network.

IP Address

The IP Address is listed in the Current Configuration

section, which indicates your printer has the valid IP

address.

The IP address is the one used to open your printer's

embedded web server (EWS).

For information about connecting the printer to a wireless network, see Set up the printer using the

B: Check to see if you can access the EWS

▲

After you establish that the computer and the printer both have active connections to a network,

you can verify if they are on the same network by accessing the printer's EWS. For more

ENWW

Solve network problems 75