HP Officejet 7110 Wide Format ePrinter - H812a - Manual (Page 26)

5. Lower the output tray.
6. Pull out the output tray extension.
Load custom-size paper
Use these instructions to load custom-size paper.
CAUTION: Use only custom-size paper that is supported by the printer. For more information, see
Paper specifications on page 105.
1. Lift the output tray.
2. Slide the paper guides out as far as possible.
3. Insert the paper print-side down along the right of the main tray.
Make sure the stack of paper aligns with the right and back edges of the tray, and does not
exceed the line marking in the tray.
NOTE: Do not load paper while the printer is printing.
4. Slide the paper guides in the tray to adjust them for the paper size that you have loaded.
5. Lower the output tray.
6. Pull out the output tray extension.
ENWW Load paper 13