Use the copy features, Make a copy, Change the copy settings – HP Officejet 5605 All-in-One Printer User Manual
Page 56: Make a copy change the copy settings
5
Use the copy features
The HP All-in-One enables you to produce high-quality color and black-and-white
copies on a variety of paper types, including transparencies. You can enlarge or
reduce the size of an original to fit a specific paper size, adjust the darkness of the
copy, and use special features to make high-quality copies of photos, including
borderless copies.
This chapter provides instructions for increasing copy speed, enhancing copy quality,
setting the number of copies to print, and guidelines for choosing the best paper type
and size for your job.
Tip
For the best copy performance on standard copy projects, set the paper
size to
Letter
or
A4
, the paper type to
Plain Paper
, and the copy quality to
Fast
.
This User Guide provides just a sampling of the copy features available to help you
get started using your HP All-in-One to make copies. Explore the onscreen
HP Image
Zone Help
that came with your HP All-in-One software for information on all of the
copy settings that your HP All-in-One supports. For example, the onscreen
HP Image
Zone Help
provides information on copying multiple-page documents, enhancing light
areas of your copy, and more. For more information on the
HP Image Zone Help
, see
Make a copy
You can make quality copies from the control panel. Load multiple-page originals into
the document feeder tray.
To make a copy from the control panel
1.
Make sure you have paper loaded in the input tray.
2.
Load your original print side down on the left front corner of the glass or print side
up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the
document goes in first.
3.
Do one of the following:
–
Press
Start Black
to initiate a black-and-white copy job.
–
Press
Start Color
to initiate a color copy job.
Note
If you have a color original, pressing
Start Black
produces a black-
and-white copy of the color original, while pressing
Start Color
produces
a full-color copy of the color original.
Change the copy settings
You can customize the copy settings of the HP All-in-One to handle nearly any task.
When you change copy settings, the changes are for the current copy job only. You
must set the changes as defaults for the settings to apply to all future copy jobs.
User Guide
53
Copy