HP Officejet 5605 All-in-One Printer - Manual (Page 47)

Load an original on the glass
You can copy, scan, or fax up to letter- or A4-size originals by loading them on the
glass. If your original is legal-size or contains multiple full-size pages, load it in the
automatic document feeder. For more information, see
Load an original in the
automatic document feeder .
Note Many of the special features will not work correctly if the glass and lid
backing are not clean. For more information, see Clean the HP All-in-One .
To load an original on the glass
1.
Remove all originals from the document feeder tray, and then lift the lid on the
HP All-in-One.
2. Place your original print side down on the left front corner of the glass.
Tip For more help on loading an original, refer to the engraved guides
along the edge of the glass.
3. Close the lid.
Choose papers for printing and copying
You can use different types and sizes of paper in your HP All-in-One. Review the
following recommendations to get the best printing and copying quality. Whenever you
change paper types or sizes, remember to change those settings.
Recommended papers for printing and copying
If you want the best print quality, HP recommends using HP papers that are
specifically designed for the type of project you are printing. If you are printing photos,
for example, load HP Premium or HP Premium Plus photo paper in the input tray.
Note This device supports 10 x 15 cm (4 x 6 inch) with tab, A4-, letter-, and
legal- (US only) size paper only.
For borderless printing, the HP All-in-One only supports printing 10 x 15 cm (4
x 6 inch) paper with tab.
Chapter 4
44 HP Officejet 5600 All-in-One series
Load
originals
and
load
paper